28/03/2024
** PLEASE NOTE THIS PRODUCT IS NOW PRE-ASSEMBLED WITH 6C ANGLED ADAPTORS INCLUDED**

Category 6A/6/5E Pod Solution
Nimikenumero 854-40276 | PODB-6UL-25/BK Yksityiskohdat

Tämä tuote ei ole enää saatavana!

Korvaava tuote on ohjelmassamme

  • The cable access supports flexible conduit or loose cable entry, although the use of conduit is recommended to prevent damage to the cable jacket and preventing reduced link performance. Internally a cable tie point is included to be able to provide an additional securing point for the cables
  • Clear labelling for all ports and the completed pod, allowing all points to be clearly identified and detailed
  • Can be supplied unloaded or as part of an RapidNet pre-terminated loom
  • Suitable modules adaptors and keystones are available separately
  • Floor mounting bracket for 25 and 32mm conduit also available separately
Näytä enemmän
Internet Customer Notice ** PLEASE NOTE THIS PRODUCT IS NOW PRE-ASSEMBLED WITH 6C ANGLED ADAPTORS INCLUDED**
PART DESCRIPTION PODB-6UL-25/BK
Product Description 6 port unloaded pod with 25mm cable entry
Product Family Category 6A/6/5E Pod Solution
Product Group 6 port unloaded pod with 25mm cable entry
Technical Description The POD-B is offered as a standard size with two different cable entry sizes for Cat6A, Cat6 and Cat5e in both UTP and FTP. The POD-B is available in nominal 6 and 4 port versions to match the RapidNet 12, 6 and 4 port presentations. This also follows common work area designs of 2, 3 points to the desk, including shared access trays (2 or 3 desks per Pod). A choice of standard IDC punch-down flat modules or keystones with angled adaptors can be installed to the pod to suit network specifications for either Cat 6 (Class E) or Cat 5e (Class D). For managing the bend radius with Cat 6A presentations it is accepts angled 6C adaptors for use with either Deca10 or GST keystones depending on the requirements of the installation. The main body of POD-B is matt black. The standard outlets and adaptors will be white giving a high contrast presentation. The cable access at the rear is available in two sizes housing bundles of up to 6 UTP or FTP cables and supports the use of flexible conduit to help prevent tight bend radii, damage from rough floor surfaces or rubbing as well as keeping the cables tidy. POD-B has three mounting holes for screws when permanently fixing in position such as to the floor (slab) in grid layouts, and two cable tie points for temporary fixing or when using access baskets; giving a simple means for securing the POD in place under the desk when located in its final position.
Depth (D) 51mm
Height (H) 215mm
Width (W) 62mm
Country of Origin GB
Dimensions W x H x D 62 mm x 215 mm x 51 mm
GTIN-13 / EAN 5022660154836